| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 19.5 MILLIMETERS MINIMUM AND 20.9 MILLIMETERS MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 20.62 MILLIMETERS MINIMUM AND 23.00 MILLIMETERS MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT POSITION ARRANGEMENT STYLE | 13-8 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 20.62 MILLIMETERS MINIMUM AND 23.00 MILLIMETERS MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INSERT MATERIAL | PLASTIC EPOXY AND GLASS SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 124.0 AND 152.0 AND 219.0 AND 265.0 |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 200.0 CELSIUS MAXIMUM |
| OVERALL HEIGHT | 28.3 MILLIMETERS MINIMUM AND 28.9 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 31.5 MILLIMETERS MAXIMUM |
| OVERALL WIDTH | 28.3 MILLIMETERS MINIMUM AND 28.9 MILLIMETERS MAXIMUM |
| MATING END QUANTITY | 15 |
| NOMINAL THREAD SIZE | 18.0 MILLIMETERS AND 0.875 INCHES AND 25.0 MILLIMETERS |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY AND KEY, MULTIPLE KEY GROOVE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CL 3 OR 4,GRADE B MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY OR ALUMINUM ALLOY 360.0 |
| SHELL SURFACE TREATMENT | NICKEL AND COPPER |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-DOD-C-38999/20 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-DOD-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | ISO M AND SPECIAL ACME |
| THREAD PITCH IN MILLIMETERS | 1.00 |
| THREAD QUANTITY PER INCH | 10 |
| THREAD TOLERANCE CLASS | 6G EXTERNAL |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY AND HUB |