| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 20.1 MILLIMETERS MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 34.93 MILLIMETERS MINIMUM AND 38.10 MILLIMETERS MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT POSITION ARRANGEMENT STYLE | 25-61 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 34.93 MILLIMETERS MINIMUM AND 38.10 MILLIMETERS MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INSERT MATERIAL | PLASTIC EPOXY AND GLASS SINGLE MATING END |
| INSERT POSITION IN DEG | 50.0 AND 160.0 AND 190.0 AND 225.0 |
| OVERALL HEIGHT | 46.0 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 33.66 MILLIMETERS MAXIMUM |
| OVERALL WIDTH | 46.0 MILLIMETERS NOMINAL |
| MATING END QUANTITY | 12 |
| NOMINAL THREAD SIZE | 37.0 MILLIMETERS AND 1.625 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY AND KEY, MULTIPLE KEY GROOVE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY OR ZINC |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND ZINC |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-DOD-C-38999/20 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-DOD-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD PITCH IN MILLIMETERS | 1.00 |
| THREAD QUANTITY PER INCH | 10 AND 32 AND 18 |
| THREAD SERIES DESIGNATOR | ISO M AND SPECIAL ACME |
| THREAD TOLERANCE CLASS | 6G EXTERNAL AND 6H INTERNAL |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY AND HUB |