|
|
|
National Stock Number:
5935-01-262-1009
Federal Supply Class:
5935
National Item Identification Number:
012621009
Description:
CLAMP,CABLE,ELECTRICAL CONNECTOR
Detail:
A clamp specifically designed to hold an electrical cable firmly in a connector. Must include provisions for attachment to an electrical connector. Excludes ADAPTER (1), CABLE TO CONNECTOR.
|
Manufacturer Information:
| M85049/57 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85049/57-16W | 0U583 | SAE INTERNATIONAL | | M85049/57-16W | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/57 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27669-B-16 | 53711 | NAVAL SEA SYSTEMS COMMAND | | MS27669B16 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/57 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| BODY ANGLE IN DEG | 135.0 | | CABLE OPENING DIAMETER | 0.756 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | DISTANCE FROM CENTERLINE TO CABLE END | 1.310 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 1.330 INCHES MAXIMUM | | OVERALL WIDTH | 1.250 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD SIZE | 0.938 INCHES | | SIZE DESIGNATION | 16 AND 17 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/57 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | CLAMP, ANGLE TIE STRAP TYPE | | SURFACE TREATMENT | CADMIUM AND CHROMATE | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNEF |
|
|