|
|
|
National Stock Number:
5935-01-216-2284
Federal Supply Class:
5935
National Item Identification Number:
012162284
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 10082793 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | M85049/17-12W05 | 0U583 | SAE INTERNATIONAL | | M85049/1712W05 | 0U583 | SAE INTERNATIONAL | | M85049/1712W05 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | M85049/1712W05 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/17 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS85049/17 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.500 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | OVERALL HEIGHT | 1.250 INCHES MAXIMUM | | OVERALL LENGTH | 2.812 INCHES MAXIMUM | | OVERALL WIDTH | 1.250 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD SIZE | 0.688 INCHES | | SEAL MATERIAL | RUBBER, SILICONE BASE | | SEAL TYPE | PREFORMED PACKING | | SIZE DESIGNATION | 12 AND 13 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/17 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | STRAIGHT TYPE W/CABLE CLAMP | | SURFACE TREATMENT | CADMIUM | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNEF |
|
|