| DISTANCE FROM CENTERLINE TO CONNECTOR END | 3.125 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE TO CABLE END | 4.250 INCHES MAXIMUM |
| BODY ANGLE IN DEG | 135.0 |
| BODY STYLE | ANGLE SHAPE W/CABLE CLAMP |
| CABLE ENTRANCE DIAMETER | 0.875 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 36-10 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| INCLUDED CONTACT QUANTITY | 48 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | RUBBER SILICONE CLASS Q SINGLE MATING END |
| INSERT POSITION IN DEG | 125.0 |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM |
| OVERALL DIAMETER | 2.469 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 2.250 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.048 GOLD GRAINS, TROY |
| SHELL MATERIAL | ALUMINUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 96906-MS3409 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UN |
| THREAD QUANTITY PER INCH | 16 |
| THREADED DEVICE TYPE | COUPLING FACILITY |