DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL |
CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT POSITION ARRANGEMENT STYLE | 14S-9 SINGLE MATING END |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL |
ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
INSERT MATERIAL | RUBBER SYNTHETIC SINGLE MATING END |
INSERT POSITION IN DEG | 215.0 |
OVERALL HEIGHT | 1.188 INCHES NOMINAL |
OVERALL LENGTH | 1.662 INCHES MAXIMUM |
OVERALL WIDTH | 1.188 INCHES NOMINAL |
MATING END QUANTITY | 1 |
NOMINAL THREAD SIZE | 0.875 INCHES |
NOMINAL THREAD LENGTH | 0.375 INCHES |
POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
PRECIOUS MATERIAL | GOLD |
PRECIOUS MATERIAL AND WEIGHT | 0.002 GOLD GRAINS, TROY |
SHELL MATERIAL | ALUMINUM ALLOY |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
SHELL SURFACE TREATMENT | CADMIUM |
SHELL TYPE | SOLID |
UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
SPECIFICATION/STANDARD DATA | 96906-MS3452 GOVERNMENT STANDARD |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UNEF |
THREAD QUANTITY PER INCH | 20 |
THREADED DEVICE TYPE | COUPLING FACILITY |