| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.437 INCHES NOMINAL |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.764 INCHES MINIMUM AND 0.768 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 4.022 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| COLOR | NATURAL |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL | COPPER ALLOY 1ST MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE 1ST MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | "106,A106" 1ST MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE 1ST MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD 1ST MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| GUIDE DESIGN AND LOCATION | D SHAPE PIN LEFT-HAND AND D SHAPE PIN CENTER AND D SHAPE PIN RIGHT-HAND AT 12 OCLOCK |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE 1ST MATING END |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE 2ND MATING END |
| INSERT MATERIAL | PLASTIC PHENOLIC MINERAL FILLED 1ST MATING END |
| INSERT MATERIAL | PLASTIC PHENOLIC MINERAL FILLED 2ND MATING END |
| MATING END QUANTITY | 3 |
| III BODY STYLE | STRAIGHT SHAPE |
| POLARIZATION METHOD | 3 POLARIZATION POSTS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.106 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL HEIGHT | 4.340 INCHES MINIMUM AND 4.370 INCHES MAXIMUM |
| OVERALL LENGTH | 1.215 INCHES MAXIMUM |
| OVERALL WIDTH | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | THIRD MATING END IS EMPTY |
| TERMINAL LOCATION | BACK 1ST MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP 1ST MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.122 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |