| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, FLUSH MOUNT |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.436 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | SCREW |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 40 ALL MATING ENDS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.782 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| GUIDE DESIGN AND LOCATION | HEXAGON SHAPE MALE POST LEFT-HAND AT 5 OCLOCK |
| GUIDE DESIGN AND LOCATION | HEXAGON SHAPE MALE POST RIGHT-HAND AT 12 OCLOCK |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE OR 1288BX MFR REF SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE OR PLASTIC EPOXY ALL MATING ENDS |
| OVERALL HEIGHT | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| OVERALL LENGTH | 1.700 INCHES MAXIMUM |
| OVERALL WIDTH | 3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| POLARIZATION METHOD | 2 POLARIZATION POSTS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.080 GOLD GRAINS, TROY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |
| TERMINAL LOCATION | BACK ALL MATING ENDS SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL ALL MATING ENDS SINGLE CONTACT GROUPING |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 24 |
| THREADED DEVICE TYPE | COUPLING FACILITY |