DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.930 INCHES MAXIMUM |
BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL |
CONNECTOR LOCKING METHOD | BAYONET PIN |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT POSITION ARRANGEMENT STYLE | 13-35 SINGLE MATING END |
CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
CRITICALITY CODE JUSTIFICATION | FEAT |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL |
ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
INCLUDED CONTACT QUANTITY | 22 SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
INSERT POSITION IN DEG | 75.0 |
OVERALL HEIGHT | 1.125 INCHES NOMINAL |
OVERALL LENGTH | 2.012 INCHES MAXIMUM |
OVERALL WIDTH | 1.125 INCHES NOMINAL |
MATING END QUANTITY | 1 |
NOMINAL THREAD SIZE | 0.688 INCHES |
NOMINAL THREAD LENGTH | 0.219 INCHES |
POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
PRECIOUS MATERIAL | GOLD |
PRECIOUS MATERIAL AND WEIGHT | 0.022 GOLD GRAINS, TROY |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
SHELL MATERIAL | ALUMINUM ALLOY |
SHELL SURFACE TREATMENT | CADMIUM |
SHELL TYPE | SOLID |
SPECIAL FEATURES | CONTACT NO. 18,19 AND 22 ARE GROUNDED |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
THREAD QUANTITY PER INCH | 24 |
THREADED DEVICE TYPE | BACK SHELL |
THREAD SERIES DESIGNATOR | UNEF |
UNTHREADED MOUNTING HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |