5935-01-161-0812 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-161-0815 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5935-01-161-0813

Federal Supply Class:
5935

National Item Identification Number:
011610813

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
10138416A486GNIMIKKEISTOKESKUS NCB FINLAND
602117549ITT CANNON
8003-177820AMPHENOL CORP
B4031327-00156996DEPARTMENT OF THE ARMY HQ UNITED STATES ARMY COMMUNICATIONS RESEARCH AND DEVELOPMENT COMMAND
M55339/34-0000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M555339/34-0000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-A-55339/3481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-55339/3481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
ST82D5004236LOCKHEED MARTIN CORP


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.850 INCHES MINIMUM AND 0.865 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPEROUND W/FLAT
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS125.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLETNC ALL MATING ENDS
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 1,CLASS 2,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY1 ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
OVERALL DIAMETER0.800 INCHES MAXIMUM
OVERALL LENGTH1.562 INCHES MAXIMUM
MATING END QUANTITY2
MOUNTING FACILITY THICKNESS0.055 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
NOMINAL THREAD SIZE0.438 INCHES
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
SHELL MATERIALCOPPER ALLOY
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-A-55339/34 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-A-55339 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH28
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNEF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us