5935-01-067-9410 BACKSHELL,ELECTRICAL CONNECTOR Index 5935-01-067-9413 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5935-01-067-9411

Federal Supply Class:
5935

National Item Identification Number:
010679411

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
2202-120215907MICRO-MODE PRODUCTS, INC.
766211627L3 TECHNOLOGIES, INC.
766280063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SCD 766211627L3 TECHNOLOGIES, INC.


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.573 INCHES NOMINAL
BODY STYLESTRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.718 INCHES NOMINAL
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLETNC 1ST MATING END
CONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLENONSTD 2ND MATING END
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.718 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONSHOCK PROOF AND VIBRATION PROOF
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS
INSERT MATERIALPLASTIC EPOXY ALL MATING ENDS
INSERT POSITION IN DEG0.0
OVERALL HEIGHT1.000 INCHES NOMINAL
OVERALL LENGTH1.055 INCHES NOMINAL
OVERALL WIDTH1.000 INCHES NOMINAL
MATING END QUANTITY2
NOMINAL THREAD SIZE0.4375 INCHES AND 0.250 INCHES
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763, CLASS 303, COND H FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIALSTEEL COMP 1078
SHELL TYPESOLID
UNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNEF AND UN
THREAD QUANTITY PER INCH36
THREADED DEVICE TYPECOUPLING FACILITY


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us