5935-01-058-0809, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-058-0808 CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-058-0810 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-058-0809

Federal Supply Class:
5935

National Item Identification Number:
010580809

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

4030061-275	07187	HONEYWELL INTERNATIONAL INC.
MIL-C-38999	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-38999	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27508E24F35S	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.442 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.376 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	24-35 SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.376 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
INCLUDED CONTACT QUANTITY	128 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	0.0
OVERALL HEIGHT	1.703 INCHES MAXIMUM
OVERALL LENGTH	0.697 INCHES MAXIMUM
OVERALL WIDTH	1.703 INCHES MAXIMUM
MATING END QUANTITY	1
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PRECIOUS MATERIAL AND WEIGHT	0.128 GOLD GRAINS, TROY AND 0.128 SILVER GRAINS, TROY
PRECIOUS MATERIAL	GOLD AND SILVER
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE
SHELL SURFACE TREATMENT	NICKEL
SHELL TYPE	SOLID
UNTHREADED MOUNTING HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	96906-MS27508 GOVERNMENT STANDARD
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial