| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.785 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 25-61 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.500 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| FEATURES PROVIDED | SCOOPPROOF DESIGN |
| INCLUDED CONTACT QUANTITY | 61 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| INSERT POSITION IN DEG | 95.0 AND 132.0 AND 232.0 AND 260.0 AND 345.0 |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM |
| OVERALL HEIGHT | 1.812 INCHES MINIMUM AND 1.832 INCHES MAXIMUM |
| OVERALL LENGTH | 1.290 INCHES MAXIMUM |
| OVERALL WIDTH | 1.812 INCHES MINIMUM AND 1.832 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.219 INCHES |
| NOMINAL THREAD SIZE | 1.438 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.061 GOLD GRAINS, TROY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 96906-MS27656 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNEF |
| THREAD QUANTITY PER INCH | 18 |
| THREADED DEVICE TYPE | BACK SHELL |