BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.938 INCHES NOMINAL |
CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 245.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT POSITION ARRANGEMENT STYLE | 36-5 SINGLE MATING END |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.938 INCHES NOMINAL |
ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT |
INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
INSERT MATERIAL | GLASS SINGLE MATING END |
INSERT POSITION IN DEG | 0.0 |
OVERALL HEIGHT | 2.531 INCHES MAXIMUM |
OVERALL LENGTH | 3.000 INCHES MAXIMUM |
OVERALL WIDTH | 2.531 INCHES MAXIMUM |
MATING END QUANTITY | 1 |
NOMINAL THREAD SIZE | 2.250 INCHES |
POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
PRECIOUS MATERIAL | GOLD |
PRECIOUS MATERIAL AND WEIGHT | 0.020 GOLD GRAINS, TROY |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE |
SHELL MATERIAL | STEEL |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
SHELL SURFACE TREATMENT | CADMIUM |
SHELL TYPE | SOLID |
UNTHREADED MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UN |
THREAD QUANTITY PER INCH | 16 |
THREADED DEVICE TYPE | COUPLING FACILITY |