5935-01-040-1280 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-040-1284 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-040-1283

Federal Supply Class:
5935

National Item Identification Number:
010401283

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
518-10R08-03PN02660AMPHENOL CORP SPECTRA-STRIP/ITD
M83723/72R0803N81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC83723-7281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.594 INCHES NOMINAL
CONNECTOR LOCKING METHODBAYONET PIN
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE8-3 SINGLE MATING END
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.594 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONPRESSURE PROOF AND DRIPPROOF AND SHOCK PROOF AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY3 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG0.0
OVERALL HEIGHT0.812 INCHES NOMINAL
OVERALL LENGTH1.490 INCHES MAXIMUM
OVERALL WIDTH0.812 INCHES NOMINAL
MATING END QUANTITY1
NOMINAL THREAD SIZE0.500 INCHES
NOMINAL THREAD LENGTH0.290 INCHES
POLARIZATION METHODKEY, MULTIPLE KEY GROOVE
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.015 GOLD GRAINS, TROY
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIALALUMINUM ALLOY
SHELL TYPESOLID
UNTHREADED MOUNTING HOLE DIAMETER0.120 INCHES NOMINAL
SPECIFICATION/STANDARD DATA81349-MIL-C-83723 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-83723 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH20
THREADED DEVICE TYPEBACK SHELL


Click here to Register for Free 30-day Trial