|
|
|
National Stock Number:
5935-01-035-5154
Federal Supply Class:
5935
National Item Identification Number:
010355154
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 2006-7196-66 | 26805 | TYCO ELECTRONICS CORP | | 50-642-0059-89 | 98291 | ITT CANNON RF PRODUCTS | | 50-642-0059-894 | 98291 | ITT CANNON RF PRODUCTS | | 705004-001 | 16733 | RFS TECHNOLOGIES, INC. | | 705004-001 | 96341 | COBHAM ADVANCED ELECTRONIC SOLUTIONS INC. | | 922543-2C | 82577 | RAYTHEON COMPANY | | CDI 5727-373-6SF | 30990 | AMPHENOL CABLE AND INTERCONNECT TECHNOLOGIES, INC. | | CDI 5727-4SF | 30990 | AMPHENOL CABLE AND INTERCONNECT TECHNOLOGIES, INC. |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.310 INCHES NOMINAL | | BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP | | BUSHING DIAMETER | 0.344 INCHES NOMINAL | | CABLE ENTRANCE DIAMETER | 0.094 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.340 INCHES NOMINAL | | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.340 INCHES NOMINAL | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END | | OVERALL HEIGHT | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 0.700 INCHES MAXIMUM | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.250 INCHES | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY | | SHELL MATERIAL | STEEL | | SHELL SURFACE TREATMENT | CHROMATE | | SHELL TYPE | SOLID | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | PIN SINGLE MATING END SINGLE CONTACT GROUPING | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 36 | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNS | | UNTHREADED MOUNTING HOLE DIAMETER | 0.102 INCHES NOMINAL |
|
|