5935-01-033-9646 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-033-9650 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-033-9648

Federal Supply Class:
5935

National Item Identification Number:
010339648

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M39012/60-000181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC39012-6081349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.338 INCHES MINIMUM AND 0.342 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
BUSHING DIAMETER0.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.338 INCHES MINIMUM AND 0.342 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS335.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLENONSTD SINGLE MATING END
CONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND SHOCK PROOF AND VIBRATION RESISTANT
MATING END QUANTITY1
III BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY
NOMINAL THREAD SIZE0.250 INCHES
NOMINAL THREAD LENGTH0.170 INCHES
OVERALL HEIGHT0.510 INCHES MAXIMUM
OVERALL LENGTH0.600 INCHES MAXIMUM
OVERALL WIDTH0.510 INCHES MAXIMUM
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIALCOPPER ALLOY
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-C-39012/60 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH36
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNS
UNTHREADED MOUNTING HOLE DIAMETER0.099 INCHES MINIMUM AND 0.106 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us