5935-01-019-8922 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-01-019-8924 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-019-8923

Federal Supply Class:
5935

National Item Identification Number:
010198923

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
MIL-C-3899981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-3899981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27499E18B35SA96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.317 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
CONNECTOR LOCKING METHODBAYONET PIN
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE18-35 SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CRITICALITY CODE JUSTIFICATIONAEHA AND AEBW
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT
INCLUDED CONTACT QUANTITY66 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPEROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG342.0
OVERALL HEIGHT1.328 INCHES MAXIMUM
OVERALL LENGTH0.703 INCHES MAXIMUM
OVERALL WIDTH1.328 INCHES MAXIMUM
MATING END QUANTITY1
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PRECIOUS MATERIALGOLD AND SILVER
PRECIOUS MATERIAL AND WEIGHT0.066 GOLD GRAINS, TROY AND 0.066 SILVER GRAINS, TROY
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM AND CHROMATE
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-C-38999 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us