|
|
|
National Stock Number:
5935-01-017-3701
Federal Supply Class:
5935
National Item Identification Number:
010173701
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 10129108 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | MIL-DTL-38999 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC38999 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27656T11B98P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27656T11F98P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.815 INCHES MINIMUM AND 0.820 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 11-98 SINGLE MATING END | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 6 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.031 INCHES NOMINAL | | OVERALL LENGTH | 1.289 INCHES MAXIMUM | | OVERALL WIDTH | 1.031 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.562 INCHES | | NOMINAL THREAD LENGTH | 0.219 INCHES | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURRACES GOLD | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.006 GOLD GRAINS, TROY | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 24 | | THREADED DEVICE TYPE | BACK SHELL |
|
|