|
|
National Stock Number: 5935-01-016-2450
Federal Supply Class: 5935
National Item Identification Number: 010162450
Description: CONNECTOR,RECEPTACLE,ELECTRICAL
Detail: An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
M83723/09H14-18N | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-C-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-DTL-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MS3440H14C18P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.578 INCHES MINIMUM AND 0.598 INCHES MAXIMUM | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.906 INCHES NOMINAL | CONNECTOR LOCKING METHOD | BAYONET PIN | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 SINGLE MATING END SINGLE CONTACT GROUPING | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | CONTACT POSITION ARRANGEMENT STYLE | 14-18 SINGLE MATING END | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.906 INCHES NOMINAL | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND HUMIDITY RESISTANT AND SHOCK PROOF AND VIBRATION PROOF | INCLUDED CONTACT QUANTITY | 18 SINGLE MATING END SINGLE CONTACT GROUPING | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | INSERT POSITION IN DEG | 0.0 | OVERALL HEIGHT | 1.141 INCHES MAXIMUM | OVERALL LENGTH | 0.979 INCHES NOMINAL | OVERALL WIDTH | 1.141 INCHES MAXIMUM | MATING END QUANTITY | 1 | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | PRECIOUS MATERIAL | GOLD | PRECIOUS MATERIAL AND WEIGHT | 0.018 GOLD GRAINS, TROY | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE | SHELL MATERIAL | STEEL | SHELL TYPE | SOLID | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL | SPECIFICATION/STANDARD DATA | 96906-MS3440 GOVERNMENT STANDARD | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | TEST DATA DOCUMENT | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|