|
|
|
National Stock Number:
5935-01-010-7618
Federal Supply Class:
5935
National Item Identification Number:
010107618
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 160 | 77881 | HUBBELL-RACO INC | | 647 | 16111 | RODALE ELECTRONICS INC. | | 914123196-001 | 54206 | CUBIC SIMULATION SYSTEMS, INC. | | 9350 | 74545 | HUBBELL INC WIRING DEVICE DIV | | GE4132-3 | 41326 | GENERAL ELECTRIC CO WIRING DEVICE DEPT | | W-C-00596C | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | W-C-00596CSTYLES1 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | W-C-596/33 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | WC596/33-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | WALL TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.276 INCHES MINIMUM AND 3.286 INCHES MAXIMUM | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 250.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 30.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 250.0 SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT POSITION ARRANGEMENT STYLE | "3,10-30" SINGLE MATING END | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.807 INCHES MINIMUM AND 1.817 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | HEAT RESISTANT | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END 1ST CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | FLAT SOCKET SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | L-SOCKET SINGLE MATING END 1ST CONTACT GROUPING | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.138 INCHES | | POLARIZATION METHOD | CONTACT | | SPECIFICATION/STANDARD DATA | 81348-W-C-596/33 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END 2ND CONTACT GROUPING | | TERMINAL LOCATION | FRONT SINGLE MATING END 1ST CONTACT GROUPING | | TERMINAL TYPE | SCREW SINGLE MATING END ALL CONTACT GROUPINGS | | TEST DATA DOCUMENT | 81348-W-C-596 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNC | | THREADED DEVICE TYPE | MOUNTING HOLE |
|
|