|
|
National Stock Number: 5935-00-997-8026
Federal Supply Class: 5935
National Item Identification Number: 009978026
Description: CONNECTOR,RECEPTACLE,ELECTRICAL
Detail: An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
283550-1105 | U6441 | ATLANTIC INERTIAL SYSTEMS LIMITED | 352250021447 | H0203 | THALES NEDERLAND B.V. | 400-2695 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | 4118800-741 | 05869 | RAYTHEON COMPANY | 59359978026 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | 724102 | 56232 | LOCKHEED MARTIN CORPORATION | 944445-2402 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | ANUG912AU | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | M39012/24-0002 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-C-39012/24 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-PRF-39012/24 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MS35183-912 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MS35183-912A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | UG912AU | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | UG912AU | 91836 | WINCHESTER INTERCONNECT CORPORATION | UG912BU | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | UG912U | 71468 | ITT CANNON LLC | UG912U | 74868 | AMPHENOL CORPORATION | UG912U | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
BODY STYLE | STRAIGHT SHAPE W/SOLDER MOUNT | CONNECTOR LOCKING METHOD | BAYONET PIN | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | OVERALL DIAMETER | 0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM | OVERALL LENGTH | 1.328 INCHES NOMINAL | MATING END QUANTITY | 1 | NOMINAL THREAD SIZE | 0.375 INCHES | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | SHELL MATERIAL | COPPER ALLOY | SHELL TYPE | SOLID | SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-39012/24 GOVERNMENT SPECIFICATION | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | TERMINAL TYPE | TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING | TEST DATA DOCUMENT | 81349-MIL-PRF-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD SERIES DESIGNATOR | UNEF | THREAD QUANTITY PER INCH | 32 | THREADED DEVICE TYPE | MOUNTING HOLE |
|
|