|
|
|
National Stock Number:
5935-00-990-1656
Federal Supply Class:
5935
National Item Identification Number:
009901656
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| MIL-C-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3115-12 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.462 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.047 INCHES MAXIMUM | | OVERALL LENGTH | 0.524 INCHES NOMINAL | | OVERALL WIDTH | 1.047 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 96906-MS3115 GOVERNMENT STANDARD | | TEST DATA DOCUMENT | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
|
|