|
|
|
National Stock Number:
5935-00-839-4094
Federal Supply Class:
5935
National Item Identification Number:
008394094
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| A05768 | K0967 | MBDA UK LTD | | MIL-DTL-32385/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-7788 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90335-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90335-3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SPECIAL FEATURES | MATERIAL OF BODY IS BRASS AND INSULATOR IS POLYTETRAFLUORAETHYLENE. CENTER CONTACT IS TEMPERED AND HEAT TREATED BERYLLIUM COPPER. THE SOLDER LUG IS TEMPERED BRASS. CENTER AND GROUND CONTACTS ARE GOLD-PLATED COPPER. HARDWARE IS ELECTRODEPOSITED NICKEL OVER COPPER. FEMALE CENTER CONTACT FINGERS CLOSED DOWN UNIFORMLY TO MEET 4 OZ MINIMUM WITHDRAWAL FORCE. TO ENSURE ELECTRICAL CONTINUITY, THE BODY SHALL MEET A MINIMUM WITHDRAWAL FORCE OF 1LB. CAPTIVATION OF INSULATOR AND CENTER CONTACT WILL MAINTAIN 12 POUNDS FORCE WHEN APPLIED FROM INTERFACE END. MANUFACTURERS IDENTIFICATION TO BE PERMANENTLY STAMPED IN METAL PART OF RECEPTACLE. INSULATOR SHALL NOT EXCEED DIAMETER OF BODY. |
|
|