| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.588 INCHES NOMINAL |
| BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING |
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 4000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND THERMAL SHOCK RESISTANT AND SHOCK RESISTANT |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | L-P-389 FED SPEC 1ST MATERIAL RESPONSE OR L-P-403 FED SPEC 2ND MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC FLUORINATED ETHYLENE PROPYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL DIAMETER | 0.585 INCHES MINIMUM AND 0.605 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.912 INCHES NOMINAL |
| OVERALL LENGTH | 1.500 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| MOUNTING FACILITY THICKNESS | 0.045 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 165.0 CELSIUS MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND BODY SURFACE SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC 1ST TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | SILVER AND COPPER |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39012/23 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-39012 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | BACK SHELL AND MOUNTING BUSHING |