| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.431 INCHES NOMINAL |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.594 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 8-4 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.594 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT |
| INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | RUBBER SYNTHETIC SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 |
| OVERALL HEIGHT | 0.812 INCHES NOMINAL |
| OVERALL LENGTH | 1.266 INCHES MAXIMUM |
| OVERALL WIDTH | 0.812 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.020 GOLD GRAINS, TROY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | FURNISHED ITEMS - GROMMET AND WIRE SEAL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP AND SOLDER SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNEF |
| THREAD QUANTITY PER INCH | 28 |
| THREADED DEVICE TYPE | BACK SHELL |