5330-00-808-6791 PARTS KIT,SEAL REPLACEMENT,MECHA Index 5360-00-808-6794 SPRING,HELICAL,COMPRESSION

National Stock Number:
5935-00-808-6792

Federal Supply Class:
5935

National Item Identification Number:
008086792

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
MILC501581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3102R24-7PY96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.812 INCHES NOMINAL
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.375 INCHES NOMINAL
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS22.0 SINGLE MATING END 1ST CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS41.0 SINGLE MATING END 2ND CONTACT GROUPING
CONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS700.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE24-7 SINGLE MATING END
CONTACT SURFACE TREATMENTGOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.375 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONMOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF
INCLUDED CONTACT QUANTITY14 SINGLE MATING END 1ST CONTACT GROUPING
INCLUDED CONTACT QUANTITY2 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG250.0
OVERALL HEIGHT1.750 INCHES NOMINAL
OVERALL LENGTH1.938 INCHES MAXIMUM
OVERALL WIDTH1.750 INCHES NOMINAL
MATING END QUANTITY1
NOMINAL THREAD LENGTH0.625 INCHES
NOMINAL THREAD SIZE1.500 INCHES
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD AND CONTACT SURFACE SILVER
PRECIOUS MATERIALGOLD AND SILVER
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL SURFACE TREATMENTCADMIUM
SHELL TYPESOLID
UNTHREADED MOUNTING HOLE DIAMETER0.147 INCHES NOMINAL
TERMINAL LOCATIONBACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPESOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
TEST DATA DOCUMENT81349-MILC5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNEF
THREADED DEVICE TYPECOUPLING FACILITY


Click here to Register for Free 30-day Trial