5935-00-785-7156, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-785-7156

Federal Supply Class:
5935

National Item Identification Number:
007857156

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

414-2608-006	94756	THE BOEING COMPANY
457-5923	A486G	NIMIKKEISTOKESKUS NCB FINLAND
AFD54-22-21S-1A	11139	TE CONNECTIVITY CORPORATION
M83723/05R2221N	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3474L22-21SN	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
PTS07DRL22-21S	77820	AMPHENOL CORP
PV74L22-21S	71468	ITT CANNON LLC

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.754 INCHES MINIMUM AND 0.772 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
BUSHING ACCOMMODATION HOLE SHAPE	ROUND W/FLAT
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT POSITION ARRANGEMENT STYLE	22-21 SINGLE MATING END
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT QUANTITY	21 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG	0.0
OVERALL DIAMETER	1.283 INCHES MINIMUM AND 1.294 INCHES MAXIMUM
OVERALL LENGTH	1.465 INCHES MAXIMUM
MATING END QUANTITY	1
MOUNTING FACILITY THICKNESS	0.062 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
NOMINAL THREAD LENGTH	0.290 INCHES
NOMINAL THREAD SIZE	1.312 INCHES AND 1.500 INCHES
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT	0.021 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM ALLOY
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	96906-MS3474 GOVERNMENT STANDARD
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD QUANTITY PER INCH	18
THREADED DEVICE TYPE	BACK SHELL AND MOUNTING BUSHING
THREAD SERIES DESIGNATOR	UNEF

Click here to Register for Free 30-day Trial