| BOARD ACCOMMODATED LENGTH | 3.093 INCHES MINIMUM AND 3.157 INCHES MAXIMUM |
| BOARD ACCOMMODATED WIDTH | 0.054 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT EDGE TYPE W/MOUNTING FLANGE |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 1 ROW OF CONTACTS INSERTED BOARD SINGLE MATING END |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 3.398 INCHES MINIMUM AND 3.414 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 18 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | BIFURCATED SPRING SINGLE MATING END SINGLE CONTACT GROUPING |
| OVERALL HEIGHT | 0.431 INCHES MINIMUM AND 0.471 INCHES MAXIMUM |
| OVERALL LENGTH | 3.736 INCHES MAXIMUM |
| OVERALL WIDTH | 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.328 INCHES |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| POLARIZATION METHOD | CONTACT TO CONTACT POLARIZING KEYS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.018 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | PLASTIC DIALLYL PHTHALATE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | PLASTIC DIALLYL PHTHALATE |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-21097/1 GOVERNMENT SPECIFICATION |
| TERMINAL LOCATION | FRONT SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-21097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | MOUNTING HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES NOMINAL |