|
|
|
National Stock Number:
5935-00-774-3781
Federal Supply Class:
5935
National Item Identification Number:
007743781
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M81511-53FF01P2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC81511-53 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.770 INCHES MINIMUM AND 0.778 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 18-85 SINGLE MATING END | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 1,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 85 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT POSITION IN DEG | 342.0 AND 211.0 AND 168.0 AND 101.0 | | OVERALL DIAMETER | 1.631 INCHES MINIMUM AND 1.651 INCHES MAXIMUM | | OVERALL LENGTH | 1.167 INCHES MINIMUM AND 1.187 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | MOUNTING FACILITY THICKNESS | 0.125 INCHES MAXIMUM | | NOMINAL THREAD SIZE | 1.125 INCHES | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.085 GOLD GRAINS, TROY | | PRECIOUS MATERIAL | GOLD | | SHELL MATERIAL | ALUMINUM ALLOY 6061 | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,COMP 6061,T6 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81511/53 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UN | | THREAD QUANTITY PER INCH | 28 AND 20 | | THREADED DEVICE TYPE | BACK SHELL AND MOUNTING BUSHING |
|
|