|
|
|
National Stock Number:
5935-00-674-6051
Federal Supply Class:
5935
National Item Identification Number:
006746051
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-150921-143 | 77820 | AMPHENOL CORP | | 10-150921-143 | 82010 | LEYDEN HYDRAULICS INC | | 10393998-004 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 8835691 | 19203 | PICATINNY ARSENAL | | 8835691 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | GC829B14-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HS5098-1430 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.467 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM | | OVERALL LENGTH | 0.508 INCHES MINIMUM AND 0.550 INCHES MAXIMUM | | OVERALL WIDTH | 1.334 INCHES MINIMUM AND 1.354 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
|
|