DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.688 INCHES MAXIMUM |
DISTANCE FROM CENTERLINE TO CABLE END | 1.312 INCHES MAXIMUM |
BODY ANGLE IN DEG | 90.0 |
BODY STYLE | ANGLE SHAPE, W/O CABLE CLAMP |
CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT POSITION ARRANGEMENT STYLE | 18-30 SINGLE MATING END |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 1,GRADE B MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
INCLUDED CONTACT QUANTITY | 5 SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
INSERT MATERIAL | RUBBER SINGLE MATING END |
INSERT POSITION IN DEG | 0.0 |
OVERALL DIAMETER | 1.344 INCHES MAXIMUM |
MATING END QUANTITY | 1 |
NOMINAL THREAD SIZE | 1.000 INCHES AND 1.125 INCHES |
POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
PRECIOUS MATERIAL | GOLD |
PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY |
SHELL MATERIAL | ALUMINUM ALLOY |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
SHELL TYPE | SOLID |
SPECIFICATION/STANDARD DATA | 96906-MS3108 GOVERNMENT STANDARD |
TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
TEST DATA DOCUMENT | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 2A AND 2B |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UNEF |
THREAD QUANTITY PER INCH | 20 AND 18 |
THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |