5935-00-636-5806, ADAPTER,CONNECTOR

5935-00-636-5808 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5935-00-636-5806

Federal Supply Class:
5935

National Item Identification Number:
006365806

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.

Manufacturer Information:

MIL-A-27434/21	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-27434/21	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS35114	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
UG-691/U	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
UG691U	80058	JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Techincal Specification:

BODY STYLE	STRAIGHT SHAPE
BUSHING ACCOMMODATION HOLE SHAPE	ROUND
CONNECTOR LOCKING METHOD	BAYONET PIN AND EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	500.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	BNC 2ND MATING END
CONTACT POSITION ARRANGEMENT STYLE	SM 1ST MATING END
CONTACT REMOVABILITY	REMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	SILVER ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND SHOCK PROOF AND VIBRATION PROOF
INCLUDED CONTACT QUANTITY	1 ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL PIN 1ST MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	COAXIAL SOCKET 2ND MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
OVERALL DIAMETER	0.595 INCHES NOMINAL
OVERALL LENGTH	1.094 INCHES NOMINAL
MATING END QUANTITY	2
NOMINAL THREAD SIZE	0.250 INCHES AND 0.375 INCHES
PRECIOUS MATERIAL AND LOCATION	BODY SURFACES SILVER AND CONTACT SURFACES SILVER
PRECIOUS MATERIAL	SILVER
PRECIOUS MATERIAL AND WEIGHT	0.110 SILVER GRAINS, TROY
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
SHELL MATERIAL	COPPER ALLOY
SHELL SURFACE TREATMENT	SILVER
SHELL TYPE	SOLID
SPECIAL FEATURES	COMPLETE SM NON-WEATHERPROOF PLUGS USED INTERNALLY TO TYPE BNC WEATHERPROOF PLUGS USED EXTERNALLY
SPECIFICATION/STANDARD DATA	81349-MIL-A-27434/21 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT	81349-MIL-A-27434 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREADED DEVICE TYPE	COUPLING FACILITY AND MOUNTING BUSHING
THREAD SERIES DESIGNATOR	UNEF

Click here to Register for Free 30-day Trial