|
|
|
National Stock Number:
5935-00-168-4484
Federal Supply Class:
5935
National Item Identification Number:
001684484
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-150921-123 | 77820 | AMPHENOL CORP | | 10393998-003 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | GC829B12-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | M83723/45-12 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3115-12B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.462 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF | | INSERT POSITION IN DEG | 0.0 | | OVERALL HEIGHT | 1.047 INCHES NOMINAL | | OVERALL LENGTH | 0.874 INCHES NOMINAL | | OVERALL WIDTH | 1.047 INCHES NOMINAL | | MATING END QUANTITY | 1 | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
|
|