| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.651 INCHES MINIMUM AND 0.661 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE W/FLANGE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT POSITION ARRANGEMENT STYLE | SM 2ND MATING END |
| CONTACT POSITION ARRANGEMENT STYLE | UHF 1ST MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD AND SILVER ALL MATING ENDS ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 1 2ND MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 1 1ST MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET ALL MATING ENDS ALL CONTACT GROUPINGS |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC FLUOROCARBON ALL MATING ENDS |
| OVERALL HEIGHT | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| OVERALL LENGTH | 1.125 INCHES MAXIMUM |
| OVERALL WIDTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| NOMINAL THREAD SIZE | 0.250 INCHES AND 0.625 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES GOLD AND CONTACTS AND SHELL SURFACES SILVER |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.110 GOLD GRAINS, TROY AND 0.110 SILVER GRAINS, TROY |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 ALL MATING ENDS ALL CONTACT GROUPINGS |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT | GOLD AND SILVER |
| SHELL TYPE | SOLID |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 36 AND 28 |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| THREAD SERIES DESIGNATOR | UNS AND UN |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |