| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.310 INCHES NOMINAL |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| BUSHING DIAMETER | 0.208 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL HEIGHT | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| OVERALL LENGTH | 0.525 INCHES NOMINAL |
| OVERALL WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE AND SHELL SURFACE GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.105 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | STEEL COMP 303 |
| SHELL SURFACE TREATMENT | GOLD AND NICKEL |
| SHELL TYPE | SOLID |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | THREADED STUD SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 36 |
| THREAD SERIES DESIGNATOR | UNS |
| THREADED DEVICE TYPE | COUPLING FACILITY |