| CONTACT LOAD CURRENT RATING | 75.0 MILLIAMPERES RESISTIVE LOAD LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION IN-LINE |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 LOWEST AC VOLTAGE RATING AT ALTITUDE |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 220.0 HIGHEST AC VOLTAGE RATING AT ALTITUDE |
| CONTACT VOLTAGE RATING IN VOLTS | 220.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 220.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT ALTITUDE |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 1 |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| OVERALL DIAMETER | 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM |
| OVERALL LENGTH | 1.227 INCHES MINIMUM AND 1.347 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ROTARY SWITCH. |
| POLE QUANTITY | 1 SINGLE SECTION IN-LINE |
| SHAFT TYPE | ROUND, SLOTTED SINGLE ACTUATOR |
| SPECIAL FEATURES | MOUNTING HARDWARE; ONE CORROSION RESISTANT HEXAGON .089 +,- .010 INCHES THICK BY .375 INCHES ACROSS THE FLATS AND ONE INTERNAL-TOOTH LOCK WASHER, .396/.408 INCHES IN DIAMETER. |
| STYLE DESIGNATOR | MINIATURE, PIN MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 91349-MS3786-35 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD PITCH DIAMETERS | +0.368 TO 0.374 INCHES SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 6 SINGLE SECTION IN-LINE |
| THREAD TOLERANCE CLASS | .003 EXTERNAL SINGLE MOUNTING FACILITY |