|
|
|
National Stock Number:
5930-01-347-9219
Federal Supply Class:
5930
National Item Identification Number:
013479219
Description:
SWITCH,PUSH
Detail:
A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes LIGHT-SWITCH; LIGHT-SWITCH ASSEMBLY; SWITCH, BEAM SELECTING, HEADLIGHT; SWITCH, FOOT; SWITCH, INTERLOCK; SWITCH, PRESSURE; SWITCH, PUSH-PULL; SWITCH, SENSITIVE and SWITCH ASSEMBLY. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see STARTER, MOTOR and CONTROLLER, MOTOR.
|
Manufacturer Information:
| 10412-013 | 81590 | KORRY ELECTRONICS CO | | 10412-058 | 81590 | KORRY ELECTRONICS CO | | 13713-050 | 81590 | KORRY ELECTRONICS CO | | 70902-84851-104 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | 70902-84851-104 78286 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| ACTUATOR COLOR | GREEN SINGLE ACTUATOR | | BODY STYLE | PANEL MOUNTED | | ILLUMINATED ACTUATOR COLOR | GREEN SINGLE ACTUATOR | | INCLOSURE TYPE | FULLY INCLOSED | | MOUNTING METHOD | PANEL | | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.300 INCHES NOMINAL | | PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER | | SPECIAL TEST FEATURES | LAMP REQUIREMENT: 4 TYPS TI SUB MIDGET FLANGED BASE LAMPS; CONTACT RESISTANCE:.025 OHMS MAXIMUM; SWITCH CONTACTS: SILVER; TRAVEL: .21 NOMINAL; ACTUATION FORCE:4LBS NOMINAL; SHOCK:PER MIL-S-22885; MECHANICAL LIFE: 50,000 CYCLES; TEST REQUIREMENTS: HUMIDITY: METHOD 507.1 PROCESS 11;HIGH TEMPERATURE: METHOD 501.1 PROCESS 1; LOW TEMPERATURE: METHOD 502.1 PROCESS 1; SHOCK: METHOD 516.2 PROCESS 1; VIBRATION: METHOD 514.2, PROCESS 1, PART 1, CURVE M; DUST (FINE SAND): METHOD 510.1 PROCESS 1 WITH OPERATION DURING STEP 3 | | SPECIAL FEATURES | SWITCH RATINGS: 7 AMP RESISTIVE, 4 AMP INDUCTIVE (CONTINUOUS), 28VDC OR 115/230 VAC 60HZ; DIELECTRIC STRENGTH: 1000 VOLTS MINIMUM | | TERMINAL TYPE AND QUANTITY | 12 TURRET |
|
|