5930-01-345-4174 SWITCH,ROTARY Index 5975-01-345-4176 PANEL,BLANK

National Stock Number:
5930-01-345-4175

Federal Supply Class:
5930

National Item Identification Number:
013454175

Description:
SWITCH,CODE INDICATING WHEEL

Detail:
A SWITCH WHICH IS EXTERNALLY ACTUATED BY A THUMBWHEEL AND/OR PUSHBUTTON. A LEGEND OR MESSAGE IS VISUALLY DISPLAYED AT EACH POSITION OF THE INDICATING WHEEL WHICH CORRESPONDS TO ELECTRICALLY CODED OUTPUT. ELECTRICALLY CODED OUTPUT IS ACHIEVED BY ROTATING A SET OF BRUSH CONTACTS PERMANENTLY ATTACHED TO THE CODE INDICATING WHEEL, AGAINST A STATIONARY COMMUTATOR WHICH IS USUALLY A PRINTED WIRING BOARD HAVING ELECTRICAL PADS OR CONTACTS WHICH ARE INTERCONNECTED BY THE ROTATING BRUSH CONTACTS. MAY HAVE ADDITIONAL ELECTRICAL COMPONENTS (SUCH AS RESISTORS, CAPACITORS, DIODES) PREMOUNTED ON THAT PORTION OF PRINTED WIRING BOARD WHICH EXTENDS BEYOND THE BACK OF SWITCH HOUSING.


Manufacturer Information:
101BC1270258900GIGA-TRONICS INCORPORATED
L20F-30ML01963CHERRY ELECTRICAL PRODUCTS CORP


Techincal Specification:
ACTUATOR TYPELEVER ALL ACTUATORS
COLORBLACK EACH BODYBLACK EACH INDICATOR BACKGROUNDWHITE EACH INDICATOR MARKING
CONTACT ARRANGEMENT TRUTH TABLESPECIAL 1ST SECTIONSPECIAL 2ND SECTIONBCD WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS 3RD SECTIONBCD WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS 4TH SECTIONBCD WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS 5TH SECTION
CONTACT LOAD CURRENT RATING125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT
INDIVIDUAL SECTION QUANTITY5
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS3.115 INCHES NOMINAL SINGLE MOUNTING FACILITY
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS0.900 INCHES NOMINAL SINGLE MOUNTING FACILITY
OPERATING TEMP RANGE-65.0 TO 85.0 CELSIUS
OVERALL HEIGHT2.167 INCHES NOMINAL
OVERALL LENGTH3.285 INCHES NOMINAL
OVERALL WIDTH1.146 INCHES NOMINAL
MOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY
MOUNTING METHODBRACKET AND UNTHREADED HOLE SINGLE MOUNTING FACILITY
PRECIOUS MATERIAL AND LOCATIONPRINTED CIRCUIT BOARD CIRCUIT SURFACES GOLD
PRECIOUS MATERIALGOLD
READOUT INDICATOR MARKING1ST SECTION0,1 2ND SECTION0,1,2,3,4,5,6,7,8,9 3RD SECTION0,1,2,3,4,5,6,7,8,9 4TH SECTION0,1,2,3,4,5,6,7,8,9 5TH SECTION
SPECIAL TRUTH TABLE IDENTIFICATION01963-4 1ST SECTION01963-SPECIAL 0-1 2ND SECTION
UNTHREADED MOUNTING HOLE DIAMETER0.100 INCHES NOMINAL SINGLE MOUNTING FACILITY
STYLE DESIGNATORRECTANGULAR INLINE INDICATING
SWITCH ACTUATOR INDEXING POSITION QUANTITY2 1ST ACTUATOR2 2ND ACTUATOR10 3RD ACTUATOR10 4TH ACTUATOR10 5TH ACTUATOR
TERMINAL TYPEPRINTED CIRCUIT


Click here to Register for Free 30-day Trial