| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 0.1 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL 1ST ACTUATOR |
| FLAT HEIGHT | 0.093 INCHES NOMINAL 2ND ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| OVERALL DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 5.337 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER AND CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | SILVER AND GOLD |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 1ST ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 2ND ACTUATOR |
| SHAFT LENGTH | 0.375 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED 1ST ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED 2ND ACTUATOR |
| SHAFT LENGTH | 0.625 INCHES NOMINAL 2ND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 1ST ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 2ND ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES 1ST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES 2ND ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 10 EACH SECTION REAR |