| CONTACT LOAD CURRENT RATING | 0.250 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.184 INCHES MINIMUM SINGLE ACTUATOR AND 0.192 INCHES MAXIMUM SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 2 |
| POLE QUANTITY | 3 SINGLE SECTION FRONT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 10.0 MILLIMETERS SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | FLATTED BUSHING AT 9:00 O'CLOCK |
| OVERALL DIAMETER | 1.306 INCHES NOMINAL |
| OVERALL LENGTH | 1.960 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.236 INCHES MINIMUM SINGLE ACTUATOR AND 0.239 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.315 INCHES MINIMUM SINGLE ACTUATOR AND 0.320 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| WIDTH BETWEEN FLATS | 0.184 INCHES MINIMUM SINGLE ACTUATOR AND 0.190 INCHES MAXIMUM SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD LENGTH | 0.275 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.315 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | ISO M SINGLE MOUNTING FACILITY |
| THREAD PITCH DIAMETERS | +9.450/+9.531 MILLIMETERS SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 4 SINGLE SECTION FRONT |