| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +6.000 TO 16.000 INCH-POUNDS 1ST ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 3 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.500 INCHES NOMINAL 2ND MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 12:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 12:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| OVERALL HEIGHT | 3.126 INCHES NOMINAL |
| OVERALL LENGTH | 3.369 INCHES NOMINAL |
| OVERALL WIDTH | 3.126 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED HOLE 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.164 INCHES 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND WIPER ARM SURFACE GOLD |
| PRECIOUS MATERIAL | GOLD |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 157.5 DEGREES FROM NONTURN DEVICE 1ST ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | SQUARE WAFER, PANEL MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 24 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 15.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| THREAD CLASS | 2B 2ND MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL 1ST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 2ND MOUNTING FACILITY |
| THROW QUANTITY | 16 EACH SECTION REAR |