| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 120.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 300.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 6 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.375 INCHES NOMINAL 2ND MOUNTING FACILITY |
| OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
| OVERALL HEIGHT | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 5.262 INCHES NOMINAL |
| OVERALL WIDTH | 1.750 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED HOLE 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.138 INCHES 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL AT 12:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 12:00 O'CLOCK |
| POLE QUANTITY | 4 EACH SECTION REAR |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER AND TERMINALS SILVER |
| PRECIOUS MATERIAL | SILVER |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND SINGLE ACTUATOR |
| SHAFT LENGTH | 0.687 INCHES NOMINAL SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, SQUARE FRAME |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| THREAD CLASS | 2B 2ND MOUNTING FACILITY |
| THREAD LENGTH | 0.313 INCHES NOMINAL 1ST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC 2ND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| THROW QUANTITY | 3 EACH SECTION REAR |