| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.380 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNS SINGLE MOUNTING FACILITY |
| CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.470 INCHES NOMINAL 1ST ACTUATOR |
| FIRST FLAT LENGTH | 0.437 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.094 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.210 INCHES NOMINAL 1ST ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 10 |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| OVERALL DIAMETER | 2.000 INCHES MAXIMUM |
| OVERALL LENGTH | 7.120 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.469 INCHES SINGLE MOUNTING FACILITY |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM NONTURN DEVICE 1ST ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM NONTURN DEVICE 2ND ACTUATOR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED 2ND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| SHAFT LENGTH | 0.870 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT LENGTH | 1.500 INCHES NOMINAL 2ND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 2ND ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 24 1ST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 15.0 DEGREES 1ST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 15.0 DEGREES 2ND ACTUATOR |
| TERMINAL TYPE | TAB, SOLDER LUG |