| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +10.000 TO 25.000 INCH-OUNCES 1ST ACTUATOR |
| DETENT ROTATIONAL TORQUE RANGE | +5.000 TO 15.000 INCH-OUNCES 2ND ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 12.522 INCHES NOMINAL |
| OVERALL WIDTH | 0.890 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| OPERATING TEMP RANGE | -25.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 3RD SECTION REAR |
| PRECIOUS MATERIAL AND LOCATION | CLIPS AND ROTOR BLADES SILVER |
| PRECIOUS MATERIAL | SILVER |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT LENGTH | 10.348 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 9.025 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT TYPE | ROUND 2ND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED 1ST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 2ND ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 5 1ST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES ALL ACTUATORS |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 2 3RD SECTION FRONT |
| THROW QUANTITY | 3 3RD SECTION REAR |