CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD LOWEST AC VOLTAGE RATING AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS EACH SECTION REAR |
CONTACT VOLTAGE RATING IN VOLTS | 125.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 125.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 240.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
INDIVIDUAL SECTION QUANTITY | 3 |
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.297 INCHES NOMINAL SINGLE MOUNTING FACILITY |
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 2.297 INCHES NOMINAL SINGLE MOUNTING FACILITY |
OVERALL HEIGHT | 2.813 INCHES NOMINAL |
OVERALL LENGTH | 3.938 INCHES NOMINAL |
OVERALL WIDTH | 2.813 INCHES NOMINAL |
MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY |
MOUNTING METHOD | THREADED HOLE SINGLE MOUNTING FACILITY |
NOMINAL THREAD SIZE | 0.190 INCHES SINGLE MOUNTING FACILITY |
POLE QUANTITY | 2 EACH SECTION REAR |
SHAFT FLAT/SLOT ANGULAR LOCATION | 0.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
SHAFT TYPE | RECTANGULAR/SQUARE, THREADED HOLE SINGLE ACTUATOR |
SHAFT LENGTH | 1.125 INCHES NOMINAL SINGLE ACTUATOR |
SQUARE SHAFT SIZE | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
SPECIAL FEATURES | SUPPLIED W/3.750 IN. DIAL ENGRAVED NO.1 NO.2 BATTERY ON CHARGE |
STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
TERMINAL TYPE | TAB W/SCREW |
THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
THREAD QUANTITY PER INCH | 24 SINGLE MOUNTING FACILITY |
THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
THROW QUANTITY | 3 EACH SECTION REAR |