CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 3RD SECTION REAR |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 4TH SECTION REAR |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 5TH SECTION REAR |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 6TH SECTION REAR |
CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 7TH SECTION REAR |
CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 1ST SECTION REAR |
CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 2ND SECTION REAR |
CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
FEATURES PROVIDED | PUSH TO TURN |
FIRST FLAT LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM SINGLE ACTUATOR |
FLAT HEIGHT | 0.209 INCHES MINIMUM AND 0.219 INCHES MAXIMUM SINGLE ACTUATOR |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
INDIVIDUAL SECTION QUANTITY | 7 |
NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
OPERATING TEMP RANGE | -65.0 TO 125.0 CELSIUS |
OVERALL DIAMETER | 1.130 INCHES MAXIMUM |
OVERALL LENGTH | 4.647 INCHES MAXIMUM |
MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
POLE QUANTITY | 1 EACH SECTION FRONT |
ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
SHAFT LENGTH | 0.797 INCHES MINIMUM AND 0.887 INCHES MAXIMUM SINGLE ACTUATOR |
SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 SINGLE ACTUATOR |
SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES SINGLE ACTUATOR |
SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
TERMINAL TYPE | TAB, SOLDER LUG |
TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
THREAD LENGTH | 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
THROW QUANTITY | 6 EACH SECTION REAR |