| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 3.0 AMPERES RESISTIVE LOAD AND 2.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FEATURES PROVIDED | PULL TO TURN |
| FIRST FLAT LENGTH | 0.060 INCHES NOMINAL 2ND ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| FLAT HEIGHT | 0.230 INCHES MINIMUM AND 0.235 INCHES MAXIMUM 1ST ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| INDIVIDUAL SECTION QUANTITY | 1 |
| OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS |
| OVERALL DIAMETER | 1.150 INCHES NOMINAL |
| OVERALL LENGTH | 3.220 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
| POLE QUANTITY | 1 SINGLE SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 SINGLE SECTION |
| SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM 2ND ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 240.0 DEGREES FROM NONTURN DEVICE 1ST ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 60.0 DEGREES FROM NONTURN DEVICE 2ND ACTUATOR |
| SHAFT LENGTH | 0.370 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| SHAFT TYPE | ROUND, PARALLEL FLATTED, THREADED HOLE 2ND ACTUATOR |
| SHAFT LENGTH | 0.590 INCHES NOMINAL 2ND ACTUATOR |
| WIDTH BETWEEN FLATS | 0.050 INCHES NOMINAL 2ND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 60.0 DEGREES SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.430 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 6 SINGLE SECTION REAR |