| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AND 500.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF AND MOISTURE RESISTANT |
| INDIVIDUAL SECTION QUANTITY | 10 |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.888 INCHES NOMINAL 2ND MOUNTING FACILITY |
| OVERALL DIAMETER | 1.100 INCHES NOMINAL |
| OVERALL LENGTH | 5.470 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED STUD 2ND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.073 INCHES 2ND MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 12:00 O'CLOCK |
| OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT LENGTH | 0.470 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A 2ND MOUNTING FACILITY |
| THREAD CLASS | 2A 1ST MOUNTING FACILITY |
| THREAD LENGTH | 0.500 INCHES NOMINAL 2ND MOUNTING FACILITY |
| THREAD LENGTH | 0.410 INCHES NOMINAL 1ST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNF 2ND MOUNTING FACILITY |
| THROW QUANTITY | 10 EACH SECTION REAR |