| CONTACT LOAD CURRENT RATING | 0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL HEIGHT | 1.312 INCHES NOMINAL |
| OVERALL LENGTH | 2.751 INCHES NOMINAL |
| OVERALL WIDTH | 1.281 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| POLE QUANTITY | 2 EACH SECTION REAR |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | ROTOR BLADES AND CONTACTS SILVER |
| SHAFT DIAMETER | 0.375 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT DIAMETER | 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM 2ND ACTUATOR |
| SHAFT LENGTH | 0.875 INCHES NOMINAL 1ST ACTUATOR |
| SHAFT LENGTH | 1.219 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT TYPE | ROUND 2ND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED 1ST ACTUATOR |
| SPECIAL FEATURES | SWITCH IS SUPPLIED WITH COUPLING HAIRPIN,1 DUMMY TERMINAL ON REAR OF SECT 2 AND AN OUTER SHAFT WITH AN INNER HOLE THRU TO PROVIDE A FREE RUNNING INNER SHAFT |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 2ND ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES 2ND ACTUATOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 2ND SECTION REAR |
| THROW QUANTITY | 4 1ST SECTION REAR |